Auto Loader and Rinser for the Martin Robotics Automatic Beer Filling Machine
The Auto Loader and Rinser upgrade allows bottles to be placed on the inlet system in multiple ways. Load bottles with the SpeedLoader, a rotary table, or a bottle depalletizer. The Auto Loader option can help increase efficiency at your brewery. Because the operator doesn’t need to operate the rinse system, the operator loading bottles can float and help where needed. The conveyor can be setup from either side, allowing you to make the best use of your floor space.
- 10 Foot Stainless Conveyor
- Servo Motor Controlled Robotic Arm
- Automatic Rinsing
- Adjustable for multiple bottle sizes
- Roll it up to the Filler when needed and then back out of the way when you need need the space for other vital operations
- Quickly Locks in place with the Martin Robotics Beer Bottle Filling Machine
How it works:
The Loader mechanism uses robotic technology. After a sensor counts the bottles, a robotic arm gently picks up the bottles. Next, the arm rotates the set of bottles. Once they are upside down, the bottles get rinsed with a stream of water. Finally, bottles are rotated right side up, and gently placed onto the 8 Shooter’s incoming feed conveyor.
The robotic arm is servo motor controlled and tied directly into the 8 Shooter for seamless operation. One touch panel controls the whole system. This is a perfect upgrade for the growing Craft or Microbrewery. You can add it to the 8 Shooter Beer Filling machine at any time. The Auto Loader and Rinser is 100% compatible with the same full range of bottle heights and diameters as our 8 Shooter counter pressure filler.